Flying saw
Pro hladké dělení trubek
a tyčí
Description of the device
Flying saw is designed to cut pipes into precise lengths in a continuous motion called. endless pipes in a line. In the inlet, these are continuously welded pipes or pipes unwound from coils.
The flying saw is designed for tubes with a diameter of 6 – 90 mm of infinite length. The saw unit with the saw blade clamps the pipe at the saw inlet and drives the pipe at the same feed speed as the pipe feed. After a period of clamping, it cuts the pipe, releases the jaws and returns at high speed to the saw inlet.
They are always designed for a specific range of pipes according to customer requirements.
Technical parameters of the machine
Split diameters, profiles: |
6 – 90 mm |
Length after division: |
3 –21 m |
Feed speed of pipe, rod: |
up to 2,0 m/sec |
Cutting accuracy: |
+- 1,5 mm |
Control system: |
Simatic S7 1500T |
Hydraulic jaw clamping |
|
Feed into the section by hydraulic cylinder or servo drive |
|
Variable feed of the blade into the cut when cutting pipes |
|
Automatic lubrication system |
|
Safety covering with transparent glass |
Other equipment of the machine
- Unwinding device before entering the flying saw with speed control.
- Pre levelling of pipes and rods after unwinding before cutting on a flying saw.
- Continuous monitoring of defects and automatic carving of identified defects.
- Storage of gifted tubes and bars in pockets according to different lengths.
- Storing carved defects in a separate pocket.
- Description and marking profile
Straightening machines
Internal pipe grinder
Centerless pipe grinder
External stationary pipe grinder
Flying saw
Circular saw
Chamfering of pipes
Sorting and plugging
Control tables
Packaging machines
A new line for pipes or rods will demonstrably make production more efficient